Skip to content 
Choosing the right can pushers for refrigerated shelves begins with knowing your shelf and product needs. You should check the lane width. Make sure your products fit well. Pick the correct spring strength. Nova-day has many years of shelf management experience. They give reliable solutions for every retail space.
Tip: Use compatibility charts and Nova-day’s pusher system. This helps you find your best fit fast and correctly.
Key Takeaways
- Measure your shelf lane width carefully for a good fit. Use a tape measure and write down the size in millimeters or inches.
- Find out the size of your cans or bottles. This helps you pick the right pusher model. It also keeps your products neat and easy to find.
- Use Nova-day’s compatibility charts to match your shelf size with the right pusher system. This saves you time and makes sure the fit is correct.
- Pick the right spring strength for your product’s weight. Lighter items need a soft spring. Heavier items need a stronger spring to work well.
- Take care of your pusher system by cleaning the tracks often. Check for any parts that are not lined up right. This keeps your shelves neat and your products easy to reach.
Quick fit: can pushers selection
Picking the right can pushers for refrigerated shelves is easy. First, measure your shelf lane. Next, find out your product size. Then, match your needs with a trusted pusher system. These steps help keep shelves neat. They also make products simple to reach.
Measure lane width
Begin by measuring the width of each shelf lane. Use a tape measure to get the right size. Measure from one divider’s inside edge to the next divider’s inside edge. Write down the number in millimeters or inches. Most shelves have standard lane widths. Some shelves are custom sizes. Measuring carefully makes sure your pusher system fits well and works right.
Tip: Measure every lane one at a time. Shelves can be a little different in width, especially after years of use.
Identify can or bottle size
Now, check the size of the cans or bottles you want to use. Knowing the size helps you pick the best pusher and divider settings. Use the table below to compare your products with common beverage sizes:
| Type | Size | Description |
|---|---|---|
| Beer Can | 8.4 oz | Small can for quick refreshment |
| Beer Can | 12 oz | Most popular size, easy to carry |
| Beer Can | 16 oz | Tallboy, more volume for parties |
| Beer Can | 19.2 oz | Larger can for those wanting more beer |
| Beer Can | 24 oz | Oil can, found in specialty beers |
| Beer Can | 32 oz | Crowler, for taking draft beer home |
| Beer Can | 64 oz | Growler, eco-friendly for refills |
| Beer Bottle | 12 oz | Standard size in the US, single serving |
| Beer Bottle | 22 oz | Bomber, ideal for sharing |
| Beer Bottle | 40 oz | Popular for parties, malt liquor |
| Beer Bottle | 11.2 oz | Common in European beers, for tasting |
| Beer Bottle | 25.4 oz | Like a wine bottle, for specialty beers |
| Beer Bottle | 32 oz | Growler, for takeout or refilling |
Look at your product and compare it to the list. If your can or bottle is not listed, measure its diameter and height. This will help you pick the right pusher system.
Match with Nova-day pusher system
Now, use your lane width and product size to find a matching pusher system. Nova-day has the Gravity-Feed Slow Motion Beverage Pusher System. It works for many can and bottle types. This system uses wire dividers that adjust themselves. You can set these dividers to three widths. This makes it easy to organize different beverage sizes.
| Feature | Description |
|---|---|
| Self-Adjustable Wire Dividers | Adjusts to three widths for different product sizes |
| Accommodates Various Sizes | Organizes many types of cans and bottles |
Note: Nova-day is a top OEM in shelf management. They make pusher systems that fit most standard and custom shelves. Their Gravity-Feed Slow Motion Beverage Pusher System comes in 3-lane and 5-lane organizers. You can pick the best one for your shelf and products.
When picking can pushers, always check Nova-day’s compatibility chart. This chart shows which pusher models fit your lane width and product size. If you need something special, Nova-day can make a custom system for your shelf. Using the right pusher system keeps products facing forward and easy to grab. This makes shelves look better and helps sales.
Compatibility charts for can pushers
Lane width and product compatibility
You have to match your shelf lane width with the right can pushers. First, measure each lane on your refrigerated shelf. Write down the numbers. Next, check the size of your cans or bottles. Use the chart below to see which Nova-day pusher system works for you.
| Lane Width (mm) | Product Type | Recommended Pusher Model |
|---|---|---|
| 60–70 | 8.4–12 oz cans | ND-GF3 (3-Lane Organizer) |
| 70–85 | 16–19.2 oz cans | ND-GF3 or ND-GF5 |
| 85–100 | 24–32 oz cans/bottles | ND-GF5 (5-Lane Organizer) |
| 100+ | 40–64 oz bottles | Custom Solution Available |
Note: Nova-day has a full compatibility chart on their website. This chart helps you find the best fit for your shelf and product size fast. You can see more at Nova-day’s official site.
Nova-day model options
Nova-day has different models for many shelf setups. You can pick the Gravity-Feed Slow Motion Beverage Pusher System. It comes in 3-lane and 5-lane organizers. Each model has wire dividers you can adjust. These let you change the width for different products. If your shelf or product is special, Nova-day can make a custom solution.
- ND-GF3 (3-Lane Organizer): Good for narrow lanes and small cans.
- ND-GF5 (5-Lane Organizer): Great for wide lanes and big bottles.
- Easy Lock Self-adjusted System: Lets you change settings fast for different bottle shapes and sizes.
Tip: Always check the model number and lane width before you order. This makes sure your can pushers fit right and work well.
Key specifications overview
When you look at Nova-day can pusher models, focus on the main details. These help you pick the right system for your store.
| Criteria | Description |
|---|---|
| Lane Width Range | Fits lanes from 60 mm to 100+ mm |
| Product Size Supported | 8.4 oz cans to 64 oz bottles |
| Divider Adjustment | Self-adjustable wire dividers (3 or 5 lanes) |
| Spring Mechanism | Durable, slow-motion, up to 3 years lifespan |
| Material | ABS, PVC, PET (suitable for cold and humid environments) |
| Mounting Flexibility | Clip-on, adhesive, or magnetic rails |
| Environmental Rating | IP54 or higher (safe for refrigerated shelves) |
| Customization | Size, color, and design options available |
You should always check these details before you choose. This helps you get the best use and longest life from your can pushers.
Sidebar:
Nova-day’s compatibility charts and model guides help you match your shelf and product. You can download these charts from their website for quick use in your store.
Lane width selection guide
How to measure accurately
You need to measure each shelf lane with care. Start by using a tape measure. Place the tape at the inside edge of one divider and stretch it to the inside edge of the next divider. Write down the measurement in millimeters or inches. Repeat this for every lane, as widths can change from one lane to another. Always measure when the shelf is empty. This gives you the most accurate result.
Tip: Double-check your measurements before you order can pushers. Even a small mistake can affect how well your system works.
Industry standards help guide your choices. Here is a quick reference:
| Aisle Width Requirement | Description |
|---|---|
| Minimum Width | At least 4 feet |
| Recommended Width | At least 3 feet wider than the largest equipment |
Standard vs. custom lanes
Standard lane widths make installation simple. You can often reduce standard widths to add more lanes without building new shelves. This saves time and effort. For example, if you reduce a 12-foot lane to 10 feet, you can fit an extra lane. This change can also help move products faster and keep shelves organized.
Custom lanes need more planning. You may need special tools or extra parts. Custom setups often take longer to install. You should only choose custom lanes if your products do not fit standard sizes.
Tips for tricky shelves
Some shelves have odd shapes or sizes. You might find uneven surfaces or tight corners. In these cases, measure each section by itself. Use a notepad to track every measurement. If you see gaps or bumps, note them down. Choose adjustable dividers and pushers for these shelves. Nova-day offers custom solutions for unique layouts.
Note: If you have questions about tricky shelves, contact Nova-day for advice. Their team can help you find the best fit for your store.
Spring selector for can pushers
Selecting the right spring strength is important for keeping your products front-facing and easy to reach. You need to match the spring to the weight and type of product on your shelf. This helps your display look neat and work smoothly every day.
Choosing spring strength
You should start by thinking about the size and weight of your products. Lighter cans or bottles need a gentle spring. Heavy items need a stronger spring to keep them moving forward. If you use a spring that is too strong for light products, it might push them too fast or cause them to tip over. If the spring is too weak for heavy products, they may not move forward at all.
- Spring-based pushers work well for small or delicate products.
- Variable force springs adjust to the weight of your products.
- The right spring keeps items visible and stops them from rolling away or getting stuck.
- Good spring selection gives your shelf a clean and organized look.
Tip: Always test a sample spring with your product before installing many pushers. This helps you avoid problems later.
Product weight and push force
You need to know the weight of your cans or bottles. Use a kitchen scale to check the weight of one item. Then, look at the push force needed to move it forward. Nova-day offers different spring strengths for different product weights. Matching the spring to the product weight keeps your shelf working well.
| Product Weight (g) | Suggested Spring Strength | Example Product Type |
|---|---|---|
| 100–200 | Light | Small cans, mini bottles |
| 200–400 | Medium | Standard cans, bottles |
| 400–700 | Strong | Large bottles, tall cans |
- Light springs suit items under 200 grams.
- Medium springs fit most standard cans and bottles.
- Strong springs work best for heavy or oversized products.
Reference chart for Nova-day
Nova-day makes it easy to pick the right spring. Use their spring selector chart to match your product weight and lane width to the best spring option. This chart helps you choose quickly and avoid mistakes.
| Nova-day Spring Code | Spring Strength | Product Weight Range | Lane Width Range (mm) |
|---|---|---|---|
| ND-SP-L | Light | 100–200 g | 60–75 |
| ND-SP-M | Medium | 200–400 g | 70–90 |
| ND-SP-S | Strong | 400–700 g | 85–100+ |
Sidebar:
Nova-day’s spring selector chart is available on their website. You can download it for quick reference in your store. If you have a special product or shelf, Nova-day can help you choose a custom spring.
Choosing the right spring for your can pushers keeps your shelves organized and your products easy to reach. Always check the chart and test before you install.
Installation tips for Nova-day pusher system
Shelf preparation steps
Start by clearing your shelf and removing any old organizers. Make sure the surface is clean and dry. This helps the new system stick well and stay in place. Gather your tools before you begin. You will need a ruler or measuring tape to check lane widths. Use a spirit level to keep the tracks straight. A marker or pencil helps you make temporary marks for alignment. Mounting strips or screw bases secure the rails. If you have many shelves, a rail alignment jig can speed up the process.
Tip: Always double-check your measurements before attaching anything. Accurate setup prevents problems later.
Securing and adjusting pushers
Place the rails on the shelf according to your measurements. Use the mounting strips or screws to fix them in place. Make sure each rail lines up with your marks. Slide the can pushers onto the rails. Adjust the dividers to match your product size. If you need to change the lane width, move the dividers until they fit your cans or bottles snugly. Test the pusher by placing a product at the back and watching it move forward. If it does not move smoothly, check the alignment and adjust as needed.
- Use a spirit level to keep everything straight.
- Tighten all fasteners to prevent shifting.
- Adjust dividers for a custom fit.
Ensuring smooth operation
Keep your Nova-day pusher system working well by following a few simple steps. Clean the track system with a soft brush or compressed air to remove dust and debris. Check for misalignment and reposition the rails if needed. Replace any rollers that look cracked or worn. Schedule monthly cleaning to keep dirt away. Use high-quality materials for long-lasting performance. Train your staff to load products evenly so the system does not strain from uneven weight.
Regular care keeps your display looking neat and helps your products stay front-facing for customers.
Troubleshooting and FAQs
Common fit issues
You may face some common problems when installing can pushers on refrigerated shelves. The table below shows the most frequent issues, their causes, and how you can fix them:
| Problem | Cause | Fix |
|---|---|---|
| Pusher not moving | Misaligned track | Realign the track |
| Spring too tight | Incorrect tension setting | Adjust spring manually |
| Items falling off front | No end barrier or stopper | Install stopper or retighten it |
| Products getting stuck | Shelf lip or divider issue | Trim or reposition dividers |
If you see products not moving or falling, check the track and dividers first. Small adjustments often solve the problem.
Can movement problems
Sometimes, cans or bottles do not move forward smoothly. You should check for dust or debris in the track. Clean the rails with a soft brush. Make sure the spring matches the product weight. If the spring is too strong, lighter items may tip over. If it is too weak, heavy items may not move. Adjust the spring strength or try a different spring if needed. Always test with a few products before loading the whole shelf.
- Clean tracks regularly to prevent jams.
- Check for missing stoppers or loose dividers.
- Test spring action with your heaviest and lightest products.
When to contact Nova-day support
If you cannot solve a problem or need a custom solution, you should reach out to Nova-day support. Nova-day offers many resources to help you:
- Frequently Asked Questions
- Installation Guides
- Technical Data Sheets
- Inquiry and Quote Request Forms
- Order Status Request Forms
- Submit Artwork and Specs
You can find these resources on the Nova-day website. The support team can help you with product selection, installation, and troubleshooting. If you have a unique shelf or product, Nova-day can design a custom system for you.
For the best results, always use the compatibility charts and guides before you order or install new systems.
You can pick and set up can pushers by measuring your shelf lane. Check the size of your products. Then, choose the right Nova-day model for your needs. The Nova-day pusher system has many good features:
| Feature | Benefit |
|---|---|
| Adjustable built-in dividers | Makes shelves work better and keeps things neat |
| Secure safety lock | Keeps the system steady and safe to use |
| Flexible design | Lets you move it easily without taking it off |
| Improved product visibility | Helps shoppers see products better |
| Reduced labor in shelf organization | Saves store workers time and effort |
- The system pushes products forward by itself, so you do not need to restock as often.
- You can get help or download instructions from the Nova-day website any time you need it.
FAQ
How do you know which pusher model fits your shelf?
Check your lane width and product size. Use Nova-day’s compatibility chart. Match your measurements with the recommended model. If your shelf is a custom size, ask Nova-day for help.
Can you use Nova-day pushers in a cooler or chiller?
Yes. Nova-day pushers use ABS, PVC, and PET. These materials work well in cold and humid places. You can use them in refrigerated shelves without worry.
What if your cans or bottles do not move forward smoothly?
Clean the tracks. Check for dust or debris. Make sure you use the right spring strength for your product weight. Adjust the dividers if needed.
How do you pick the right spring for your products?
Weigh your product. Look at the Nova-day spring selector chart. Choose light, medium, or strong springs based on your product’s weight. Test with a sample before installing all pushers.
Who should you contact for custom solutions or technical support?
Contact Nova-day’s support team. You can find their contact details and resources on the Nova-day website. They help with product selection, installation, and custom requests.
